আমি সত্যিই ACD প্রশংসা করি। আমার জন্য কী কাজ করেছে:
১.- কয়েক মাস আগে আমার বেসটির ব্যাকআপ ছিল এটি আমাকে উইন্ডোজ 10 এর এক্সএএমপিতে এই ব্যাকআপটি তুলতে এবং কাঠামোটি তৈরি করতে টেবিলগুলি তৈরি করতে সহায়তা করেছে
(কনফিগারেশন: উইন্ডোজ 10, xampp-Windows-x64-7.1.30- 5-ভিসি 14) mysql my.ini কনফিগারেশন ফাইলটি শেষে
NOTE: Some tables did not have ROW_FORMAT = COMPACT, so I went to operations on each
table and changed it manually.
(If I did not do that, an error appeared and I did not let the import).
NOTE2: I had the backup of months ago but it should also work by first recovering
the structure of the .frm files in case of not having a backup at hand.
(You can try this link:
https://www.percona.com/blog/2014/01/02/recover-table-structure-frm-files-mysql-
utilities/)
২.- পুরাতন ডাটাবেসটি ধারণ করে, আমি যে ডাটাবেসটি পুনরুদ্ধার করতে চাইছিলাম তার প্রতিটি টেবিলের জন্য অল্টার টেবিল এক্সএক্সএক্স ছাড়ার টেবিলস্পেস কার্যকর করতে এগিয়ে গেলাম, তারপরে সি: / এক্সএএমপি / মাইএসকিএল / ডেটা / সিস্টেমের ডাটা ফোল্ডারের আইবিডি ফাইলগুলি মুছে ফেলা হয়েছে (এই ক্ষেত্রে এটি এই পথ)
৩.- আমি পুরানো ডাটাবেসের xampp ফোল্ডারে পুনরুদ্ধার করতে চাইলে ডাটাবেস থেকে .bd ফাইলগুলি অনুলিপি করতে চেয়েছিলাম
৪.- ফাইলগুলি অনুলিপি করে রাখুন, চালান: ডাটাবেসের প্রতিটি টেবিলের জন্য টেবিলের xXX আমদানি টেবিল স্পেসে পরিবর্তন করুন, একটি সতর্কতা উপস্থিত হবে তবে আমরা এটিকে উপেক্ষা করব, তথ্যটি টেবিলটিতে লোড করা হবে এবং পরে রফতানি করা যাবে।
৫.- সম্পূর্ণ ডাটাবেসটি একটি স্কয়ার ফাইলে রফতানি করুন এবং উত্পাদন এবং সাফল্যে এটি তৈরিতে এগিয়ে যান!
# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# C:/xampp/mysql/bin/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:/xampp/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
# password = your_password
port = 3306
socket = "C:/xampp/mysql/mysql.sock"
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port= 3306
socket = "C:/xampp/mysql/mysql.sock"
basedir = "C:/xampp/mysql"
tmpdir = "C:/xampp/tmp"
datadir = "C:/xampp/mysql/data"
pid_file = "mysql.pid"
# enable-named-pipe
key_buffer = 160M
max_allowed_packet = 300M
sort_buffer_size = 1204K
net_buffer_length = 80K
read_buffer_size = 512K
read_rnd_buffer_size = 1024K
myisam_sort_buffer_size = 8M
log_error = "mysql_error.log"
# Change here for bind listening
# bind-address="127.0.0.1"
# bind-address = ::1 # for ipv6
# Where do all the plugins live
plugin_dir = "C:/xampp/mysql/lib/plugin/"
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
# commented in by lampp security
#skip-networking
#skip-federated
# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = "C:/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 40M
#bdb_max_lock = 10000
# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "C:/xampp/mysql/data"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "C:/xampp/mysql/data"
#innodb_log_arch_dir = "C:/xampp/mysql/data"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 50M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 600
## UTF 8 Settings
#init-connect=\'SET NAMES utf8\'
#collation_server=utf8_unicode_ci
#character_set_server=utf8
#skip-character-set-client-handshake
#character_sets-dir="C:/xampp/mysql/share/charsets"
sql_mode=NO_ZERO_IN_DATE,NO_ZERO_DATE,NO_ENGINE_SUBSTITUTION
log_bin_trust_function_creators = 1
[mysqldump]
quick
max_allowed_packet = 160M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
আমি আশা করি যে এটি এই পরিস্থিতি আছে এমন কাউকে সহায়তা করে।
ইংরাজী গুগল সরবরাহ করেছে