নীচের চিত্রটিতে একটি লেনদেনের প্রতিরূপ সমস্যা দেখা যাচ্ছে যা আমি বর্তমানে তদন্ত করছি।
চিত্রটি রেপ্লিকেশন মনিটর থেকে আসে।
টি-এসকিউএল ব্যবহার করে আমি কীভাবে এই তথ্যটি পেতে পারি?
নীচের চিত্রটিতে একটি লেনদেনের প্রতিরূপ সমস্যা দেখা যাচ্ছে যা আমি বর্তমানে তদন্ত করছি।
চিত্রটি রেপ্লিকেশন মনিটর থেকে আসে।
টি-এসকিউএল ব্যবহার করে আমি কীভাবে এই তথ্যটি পেতে পারি?
উত্তর:
কিছু অনলাইন অনুসন্ধান করার পরে, আপনার যা প্রয়োজন তা আমি পেয়েছি, আশা করি আমার উত্তর আপনাকে সহায়তা করবে।
উত্তর 1
বিঃদ্রঃ:
এটি কেবল লেনদেনের এবং লেনদেনের পিয়ার থেকে পিয়ারের প্রতিলিপি নিয়ে কাজ করে
নীচের স্ক্রিপ্টটি কার্যকর করার আগে বিষয়গুলি বিবেচনা করা উচিত
ডিস্ট্রিবিউশন এবং মাস্টার ডাটাবেসের অভ্যন্তরে নিম্নলিখিত সারণিতে অনুমতি প্রয়োজন Requ
USE [distribution]
IF OBJECT_ID('Tempdb.dbo.#ReplStats') IS NOT NULL
DROP TABLE #ReplStats
CREATE TABLE [dbo].[#ReplStats](
[DistributionAgentName] [nvarchar](100) NOT NULL,
[DistributionAgentStartTime] [datetime] NOT NULL,
[DistributionAgentRunningDurationInSeconds] [int] NOT NULL,
[IsAgentRunning] [bit] NULL,
[ReplicationStatus] [varchar](14) NULL,
[LastSynchronized] [datetime] NOT NULL,
[Comments] [nvarchar](max) NOT NULL,
[Publisher] [sysname] NOT NULL,
[PublicationName] [sysname] NOT NULL,
[PublisherDB] [sysname] NOT NULL,
[Subscriber] [nvarchar](128) NULL,
[SubscriberDB] [sysname] NULL,
[SubscriptionType] [varchar](64) NULL,
[DistributionDB] [sysname] NULL,
[Article] [sysname] NOT NULL,
[UndelivCmdsInDistDB] [int] NULL,
[DelivCmdsInDistDB] [int] NULL,
[CurrentSessionDeliveryRate] [float] NOT NULL,
[CurrentSessionDeliveryLatency] [int] NOT NULL,
[TotalTransactionsDeliveredInCurrentSession] [int] NOT NULL,
[TotalCommandsDeliveredInCurrentSession] [int] NOT NULL,
[AverageCommandsDeliveredInCurrentSession] [int] NOT NULL,
[DeliveryRate] [float] NOT NULL,
[DeliveryLatency] [int] NOT NULL,
[TotalCommandsDeliveredSinceSubscriptionSetup] [int] NOT NULL,
[SequenceNumber] [varbinary](16) NULL,
[LastDistributerSync] [datetime] NULL,
[Retention] [int] NULL,
[WorstLatency] [int] NULL,
[BestLatency] [int] NULL,
[AverageLatency] [int] NULL,
[CurrentLatency] [int] NULL
) ON [PRIMARY]
INSERT INTO #ReplStats
SELECT da.[name] AS [DistributionAgentName]
,dh.[start_time] AS [DistributionAgentStartTime]
,dh.[duration] AS [DistributionAgentRunningDurationInSeconds]
,md.[isagentrunningnow] AS [IsAgentRunning]
,CASE md.[status]
WHEN 1 THEN '1 - Started'
WHEN 2 THEN '2 - Succeeded'
WHEN 3 THEN '3 - InProgress'
WHEN 4 THEN '4 - Idle'
WHEN 5 THEN '5 - Retrying'
WHEN 6 THEN '6 - Failed'
END AS [ReplicationStatus]
,dh.[time] AS [LastSynchronized]
,dh.[comments] AS [Comments]
,md.[publisher] AS [Publisher]
,da.[publication] AS [PublicationName]
,da.[publisher_db] AS [PublisherDB]
,CASE
WHEN da.[anonymous_subid] IS NOT NULL
THEN UPPER(da.[subscriber_name])
ELSE UPPER (s.[name]) END AS [Subscriber]
,da.[subscriber_db] AS [SubscriberDB]
,CASE da.[subscription_type]
WHEN '0' THEN 'Push'
WHEN '1' THEN 'Pull'
WHEN '2' THEN 'Anonymous'
ELSE CAST(da.[subscription_type] AS [varchar](64)) END AS [SubscriptionType]
,md.[distdb] AS [DistributionDB]
,ma.[article] AS [Article]
,ds.[UndelivCmdsInDistDB]
,ds.[DelivCmdsInDistDB]
,dh.[current_delivery_rate] AS [CurrentSessionDeliveryRate]
,dh.[current_delivery_latency] AS [CurrentSessionDeliveryLatency]
,dh.[delivered_transactions] AS [TotalTransactionsDeliveredInCurrentSession]
,dh.[delivered_commands] AS [TotalCommandsDeliveredInCurrentSession]
,dh.[average_commands] AS [AverageCommandsDeliveredInCurrentSession]
,dh.[delivery_rate] AS [DeliveryRate]
,dh.[delivery_latency] AS [DeliveryLatency]
,dh.[total_delivered_commands] AS [TotalCommandsDeliveredSinceSubscriptionSetup]
,dh.[xact_seqno] AS [SequenceNumber]
,md.[last_distsync] AS [LastDistributerSync]
,md.[retention] AS [Retention]
,md.[worst_latency] AS [WorstLatency]
,md.[best_latency] AS [BestLatency]
,md.[avg_latency] AS [AverageLatency]
,md.[cur_latency] AS [CurrentLatency]
FROM [distribution]..[MSdistribution_status] ds
INNER JOIN [distribution]..[MSdistribution_agents] da
ON da.[id] = ds.[agent_id]
INNER JOIN [distribution]..[MSArticles] ma
ON ma.publisher_id = da.publisher_id
AND ma.[article_id] = ds.[article_id]
INNER JOIN [distribution]..[MSreplication_monitordata] md
ON [md].[job_id] = da.[job_id]
INNER JOIN [distribution]..[MSdistribution_history] dh
ON [dh].[agent_id] = md.[agent_id]
AND md.[agent_type] = 3
INNER JOIN [master].[sys].[servers] s
ON s.[server_id] = da.[subscriber_id]
--Created WHEN your publication has the immediate_sync property set to true. This property dictates
--whether snapshot is available all the time for new subscriptions to be initialized.
--This affects the cleanup behavior of transactional replication. If this property is set to true,
--the transactions will be retained for max retention period instead of it getting cleaned up
--as soon as all the subscriptions got the change.
WHERE da.[subscriber_db] <> 'virtual'
AND da.[anonymous_subid] IS NULL
AND dh.[start_time] = (SELECT TOP 1 start_time
FROM [distribution]..[MSdistribution_history] a
JOIN [distribution]..[MSdistribution_agents] b
ON a.[agent_id] = b.[id] AND b.[subscriber_db] <> 'virtual'
WHERE [runstatus] <> 1
ORDER BY [start_time] DESC)
AND dh.[runstatus] <> 1
SELECT 'Transactional Replication Summary' AS [Comments];
SELECT [DistributionAgentName]
,[DistributionAgentStartTime]
,[DistributionAgentRunningDurationInSeconds]
,[IsAgentRunning]
,[ReplicationStatus]
,[LastSynchronized]
,[Comments]
,[Publisher]
,[PublicationName]
,[PublisherDB]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
,[CurrentSessionDeliveryRate]
,[CurrentSessionDeliveryLatency]
,[TotalTransactionsDeliveredInCurrentSession]
,[TotalCommandsDeliveredInCurrentSession]
,[AverageCommandsDeliveredInCurrentSession]
,[DeliveryRate]
,[DeliveryLatency]
,[TotalCommandsDeliveredSinceSubscriptionSetup]
,[SequenceNumber]
,[LastDistributerSync]
,[Retention]
,[WorstLatency]
,[BestLatency]
,[AverageLatency]
,[CurrentLatency]
FROM #ReplStats
GROUP BY [DistributionAgentName]
,[DistributionAgentStartTime]
,[DistributionAgentRunningDurationInSeconds]
,[IsAgentRunning]
,[ReplicationStatus]
,[LastSynchronized]
,[Comments]
,[Publisher]
,[PublicationName]
,[PublisherDB]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,[CurrentSessionDeliveryRate]
,[CurrentSessionDeliveryLatency]
,[TotalTransactionsDeliveredInCurrentSession]
,[TotalCommandsDeliveredInCurrentSession]
,[AverageCommandsDeliveredInCurrentSession]
,[DeliveryRate]
,[DeliveryLatency]
,[TotalCommandsDeliveredSinceSubscriptionSetup]
,[SequenceNumber]
,[LastDistributerSync]
,[Retention]
,[WorstLatency]
,[BestLatency]
,[AverageLatency]
,[CurrentLatency]
SELECT 'Transactional Replication Summary Details' AS [Comments];
SELECT [Publisher]
,[PublicationName]
,[PublisherDB]
,[Article]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]
,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
FROM #ReplStats
GROUP BY [Publisher]
,[PublicationName]
,[PublisherDB]
,[Article]
,[Subscriber]
,[SubscriberDB]
,[SubscriptionType]
,[DistributionDB]উত্তর 2
Script_2 পাওয়া দুটিই MSDN
--First you find the distributor servername using the below running in publisher
Use master
EXEC sp_helpdistributor;
--Then you can run the below to find the type (use distributor database)
SELECT
(CASE
WHEN mdh.runstatus = '1' THEN 'Start - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '2' THEN 'Succeed - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '3' THEN 'InProgress - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '4' THEN 'Idle - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '5' THEN 'Retry - '+cast(mdh.runstatus as varchar)
WHEN mdh.runstatus = '6' THEN 'Fail - '+cast(mdh.runstatus as varchar)
ELSE CAST(mdh.runstatus AS VARCHAR)
END) [Run Status],
mda.subscriber_db [Subscriber DB],
mda.publication [PUB Name],
CONVERT(VARCHAR(25),mdh.[time]) [LastSynchronized],
und.UndelivCmdsInDistDB [UndistCom],
mdh.comments [Comments],
'select * from distribution.dbo.msrepl_errors (nolock) where id = ' + CAST(mdh.error_id AS VARCHAR(8)) [Query More Info],
mdh.xact_seqno [SEQ_NO],
(CASE
WHEN mda.subscription_type = '0' THEN 'Push'
WHEN mda.subscription_type = '1' THEN 'Pull'
WHEN mda.subscription_type = '2' THEN 'Anonymous'
ELSE CAST(mda.subscription_type AS VARCHAR)
END) [SUB Type],
mda.publisher_db+' - '+CAST(mda.publisher_database_id as varchar) [Publisher DB],
mda.name [Pub - DB - Publication - SUB - AgentID]
FROM distribution.dbo.MSdistribution_agents mda
LEFT JOIN distribution.dbo.MSdistribution_history mdh ON mdh.agent_id = mda.id
JOIN
(SELECT s.agent_id, MaxAgentValue.[time], SUM(CASE WHEN xact_seqno > MaxAgentValue.maxseq THEN 1 ELSE 0 END) AS UndelivCmdsInDistDB
FROM distribution.dbo.MSrepl_commands t (NOLOCK)
JOIN distribution.dbo.MSsubscriptions AS s (NOLOCK) ON (t.article_id = s.article_id AND t.publisher_database_id=s.publisher_database_id )
JOIN
(SELECT hist.agent_id, MAX(hist.[time]) AS [time], h.maxseq
FROM distribution.dbo.MSdistribution_history hist (NOLOCK)
JOIN (SELECT agent_id,ISNULL(MAX(xact_seqno),0x0) AS maxseq
FROM distribution.dbo.MSdistribution_history (NOLOCK)
GROUP BY agent_id) AS h
ON (hist.agent_id=h.agent_id AND h.maxseq=hist.xact_seqno)
GROUP BY hist.agent_id, h.maxseq
) AS MaxAgentValue
ON MaxAgentValue.agent_id = s.agent_id
GROUP BY s.agent_id, MaxAgentValue.[time]
) und
ON mda.id = und.agent_id AND und.[time] = mdh.[time]
where mda.subscriber_db<>'virtual' -- created when your publication has the immediate_sync property set to true. This property dictates whether snapshot is available all the time for new subscriptions to be initialized. This affects the cleanup behavior of transactional replication. If this property is set to true, the transactions will be retained for max retention period instead of it getting cleaned up as soon as all the subscriptions got the change.
--and mdh.runstatus='6' --Fail
--and mdh.runstatus<>'2' --Succeed
order by mdh.[time]উত্তর 3
এজেন্ট কাজ হিসাবে সিম্পলটাল্ক টিএসকিউএলে স্ক্রিপ্ট বৈশিষ্ট্যযুক্ত ।
গ্রাহক সার্ভারে ইনস্টল করা একটি ডিবিএ ডাটাবেস তৈরি করুন। সারণী তৈরির কোডটি হ'ল:
CREATE TABLE dbo.Replication_Qu_History(
Subscriber_db varchar(50) NOT NULL,
Records_In_Que numeric(18, 0) NULL,
CatchUpTime numeric(18, 0) NULL,
LogDate datetime NOT NULL,
CONSTRAINT PK_EPR_Replication_Que_History PRIMARY KEY CLUSTERED
(
Subscriber_db ASC, LogDate DESC
) ON PRIMARY
GOলিপি ঘ
এই টেবিলের ডেটা পর্যবেক্ষণ পদ্ধতি দ্বারা পপুলেটেড এবং সমস্যাগুলি পরীক্ষা করার জন্য একটি historicalতিহাসিক প্রসঙ্গ সরবরাহ করে। তবে এই মুহুর্তে যা ঘটছে তা নিরীক্ষণের জন্য আরও বেশি প্রয়োজন।
তিনটি জিনিস যা প্রতিরূপের স্বাস্থ্য নির্ধারণ করতে সহায়তা করে।
সাবস্ক্রিপশনের জন্য মুলতুবি থাকা অসামান্য কমান্ডের সংখ্যা
DECLARE @cmd NVARCHAR(max)
DECLARE @publisher SYSNAME, @publisher_db SYSNAME, @publication SYSNAME, @pubtype INT
DECLARE @subscriber SYSNAME, @subscriber_db SYSNAME, @subtype INT
DECLARE @cmdcount INT, @processtime INT
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @JobName SYSNAME
DECLARE @minutes INT, @threshold INT, @maxCommands INT, @mail CHAR(1) = 'N'
SET @minutes = 60 --> Define how many minutes latency before you would like to be notified
SET @maxCommands = 80000 ---> change this to represent the max number of outstanding commands to be proceduresed before notification
SET @threshold = @minutes * 60
SELECT * INTO #PublisherInfo
FROM OPENROWSET('SQLOLEDB', 'SERVER=(LOCAL);TRUSTED_CONNECTION=YES;'
, 'SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublisher')
SELECT @publisher = publisher FROM #PublisherInfo
SET @cmd = 'SELECT * INTO ##PublicationInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublication @publisher='
+ @publisher + ''')'
--select @cmd
EXEC sp_executesql @cmd
SELECT @publisher_db=publisher_db, @publication=publication, @pubtype=publication_type FROM ##PublicationInfo
SET @cmd = 'SELECT * INTO ##SubscriptionInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelpsubscription @publisher='
+ @publisher + ',@publication_type=' + CONVERT(CHAR(1),@pubtype) + ''')'
--select @cmd
EXEC sp_executesql @cmd
ALTER TABLE ##SubscriptionInfo
ADD PendingCmdCount INT NULL,
EstimatedProcessTime INT NULLবিতরণ কাজের স্থিতি পরীক্ষা করা
DECLARE cur_sub CURSOR READ_ONLY FOR
SELECT @publisher, s.publisher_db, s.publication, s.subscriber, s.subscriber_db, s.subtype, s.distribution_agentname
FROM ##SubscriptionInfo s
OPEN cur_sub
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
WHILE @@FETCH_STATUS = 0
BEGIN
SET @cmd = 'SELECT @cmdcount=pendingcmdcount, @processtime=estimatedprocesstime FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorsubscriptionpendingcmds @publisher=' + @publisher
+ ',@publisher_db=' + @publisher_db + ',@publication=' + @publication
+ ',@subscriber=' + @subscriber + ',@subscriber_db=' + @subscriber_db
+ ',@subscription_type=' + CONVERT(CHAR(1),@subtype) + ';' + ''')'
SET @ParmDefinition = N'@cmdcount INT OUTPUT,
@processtime INT OUTPUT'
--select @cmd
EXEC sp_executesql @cmd,@ParmDefinition,@cmdcount OUTPUT, @processtime OUTPUT
UPDATE ##SubscriptionInfo
SET PendingCmdCount = @cmdcount
, EstimatedProcessTime = @processtime
WHERE subscriber_db = @subscriber_db
INSERT INTO DBA.dbo.Replication_Que_History
VALUES(@subscriber_db, @cmdcount, @processtime, GETDATE())
-- find out if the distribution job with the high number of outstanding commands running or not
-- if it is running then sometimes stopping and starting the agent fixes the issue
IF EXISTS(SELECT * FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '##JobInfo%')
DROP TABLE ##JobInfo
SET @cmd = 'SELECT * INTO ##JobInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC msdb.dbo.sp_help_job @job_name='''''
+ @JobName + ''''',@job_aspect=''''JOB'''''')'
EXEC sp_executesql @cmd
IF @cmdcount > @maxCommands OR (@processtime > @threshold AND @cmdcount > 0)
BEGIN
IF (SELECT current_execution_status FROM ##JobInfo) = 1 -- This means job is currently executing so stop/start it
BEGIN
EXEC distribution.dbo.sp_MSstopdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
WAITFOR DELAY '00:00:05' ---- 5 Second Delay
SET @mail = 'Y'
END
END
--SELECT name, current_execution_status FROM ##JobInfo
IF (SELECT current_execution_status FROM ##JobInfo) <> 1 -- if the job is not running start it
BEGIN
EXEC distribution.dbo.sp_MSstartdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
SET @mail = 'Y' -- Send email if job has stopped and needed to be restarted
END
DROP TABLE ##JobInfo
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
END
CLOSE cur_sub
DEALLOCATE cur_subমাইক্রোসফ্ট সরবরাহিত পদ্ধতি চালান sp_replmonitorsubscriptionpendingcmds
--system stored procedure to run in distribution database
execute sp_replmonitorsubscriptionpendingcmds
--replication publisher server
@publisher ='PubServer',
--replication publisher database
@publisher_db = 'ProdDBPub',
--replication publication name
@publication ='ProdDBSub',
--replication subscriber server
@subscriber ='SubServer',
--replication subscriber database
@subscriber_db ='ProdDBSub1',
--choose type of subscription you have
@subscription_type ='1' --0 for push and 1 for pull
GOনীচের কোডটির জন্য অ্যাডহক বিতরণ ক্যোয়ারী সার্ভার কনফিগারেশন বিকল্প সক্ষম করা দরকার। এখানে আমি পূর্ববর্তী স্ক্রিপ্ট 3 একটি সমস্যা খুঁজে পেয়ে ধরে পাঠানোর জন্য ইমেলটি তৈরি করি sp_replmonitorsubscriptionpendingcmds।
IF @mail = 'Y'
BEGIN
DECLARE @msg VARCHAR(MAX) = 'Replication on ' + @@SERVERNAME
+ ' may be experiencing some problems. Attempts to restart the distribution agent have been made. '
+ 'If this is not the first message like this that you have received within the last hour, please investigate.'
DECLARE @body NVARCHAR(MAX)
DECLARE @xml1 NVARCHAR(MAX)
DECLARE @tab1 NVARCHAR(MAX)
DECLARE @xml2 NVARCHAR(MAX)
DECLARE @tab2 NVARCHAR(MAX)
SET @xml1 = CAST(( SELECT subscriber AS 'td','',subscriber_db AS 'td','',
latency AS 'td','', PendingCmdCount AS 'td','', EstimatedProcessTime AS 'td'
FROM ##SubscriptionInfo s
FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @tab1 ='<html><body><H4>Subscription Information </H4>
<table border = 1> <tr>
<th> Subscriber </th> <th> Subscriber Database </th> <th> Latency(seconds)</th>
<th> Undistributed Commands </th> <th> Estimated Catch Up Time</th></tr>'
-- this command gives us the last 10 measurements of latency for each subscriber
SET @xml2 = CAST(( SELECT s.Subscriber_db AS 'td','', s.Records_In_Que AS 'td','', s.CatchUpTime AS 'td','', CONVERT(CHAR(22),LogDate, 100) AS 'td'
FROM (SELECT ROW_NUMBER() OVER ( PARTITION BY subscriber_db ORDER BY Logdate DESC ) AS 'RowNumber',
subscriber_db
, Records_In_Que
, CatchUpTime
, Logdate
FROM DBA.dbo.Replication_Que_History
) s
WHERE RowNumber <= 8
FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @tab2 ='<br><br><H4>Historical Latency Information </H4>
<table border = 1>
<tr>
<th>Subscriber</th> <th>Undistributed Commands</th> <th> Catch Up Time </th> <th> Date\Time </th></tr>'
SET @body = @msg + @tab1 + @xml1 + '</table>'
+ @tab2 + @xml2 + '</body></html>'
DECLARE @to NVARCHAR(200)
SELECT @to = '' -- INSERT YOUR EMAIL ADDRESS HERE
EXEC msdb.dbo.sp_send_dbmail
@body = @body,
@body_format ='HTML',
@recipients = @to,
@subject = 'Possible Replication Problem' ;
END
DROP TABLE #PublisherInfo
DROP TABLE ##PublicationInfo
DROP TABLE ##SubscriptionInfoশেষ প্রক্রিয়াটি পর্যায়ক্রমে প্রতিরূপ স্থিতি সারণী থেকে সারিগুলি মুছে ফেলা হয় যাতে ডেটা বাসি না হয়
DECLARE @delDate datetime = getdate()-10
DELETE FROM DBA.dbo.Replication_Que_History
WHERE LogDate < @deldateপ্লসগুলিও বিবেচনা করে আমি এটিও লক্ষ করেছি যে আপনি যদি এসকিউএল সার্ভার 2005 এবং ২০০৮ মাইক্রোসফ্ট সংযোগের সাথে থাকেন তবে sp_replmonitorsubscriptionpendCCCMS নিয়ে একটি সমস্যা আছে
উপরের উত্তরগুলির মধ্যে যদি কোনও অস্পষ্ট হয় তবে আপনি যে উত্স সরবরাহ করেছেন তা অনুসরণ করতে পারেন
ধন্যবাদ!
আপনি সমস্ত প্রকাশনাগুলির জন্য এই স্ক্রিপ্টের সাথে একটি ডিস্ট্রিবিউশন ডাটাবেস থেকে dbo.MSReplication_monitordata টেবিলটি জিজ্ঞাসা করে আপনার প্রয়োজনীয় তথ্য পেতে পারেন:
USE distribution
SELECT status AS ReplicationAgentsStatus
FROM dbo.MSReplication_monitordata
WHERE publication = 'ALL'নির্দিষ্ট প্রকাশনার জন্য, WHERE বিবৃতিতে 'সমস্ত' পরিবর্তন করুন
এছাড়াও, আপনি সিস্টেম স্টোরেজ পদ্ধতি থেকে স্থিতি কলামটি ফিল্টার করতে এই পাওয়ারশেল স্ক্রিপ্টটি ব্যবহার করতে পারেন sp_replmonitorheppublication:
Invoke-Sqlcmd -Query "USE distribution
EXEC sp_replmonitorhelppublication" -ServerInstance "TIKVICKI" | Out-File d:\temp1.txt
Get-Content d:\temp1.txt | where { $_.Contains("status : ") } |
out-file d:\temp2.txt
(Get-Content d:\temp2.txt).replace('status ', 'Replication agents
status') |
Set-Content d:\Replication_Agents_Status_$(get-date -f yyyy-MM-dd-hh-mm-ss).txt
Remove-Item d:\temp1.txt -Force
Remove-Item d:\temp2.txt -Forceআমি এই নিবন্ধে এই স্ক্রিপ্টগুলি পেয়েছি , যা তৃতীয় পক্ষের সরঞ্জাম বা এসএসএমএসের সাহায্যে ইউআইয়ের মাধ্যমে কীভাবে এটি করা যায় তাও বর্ণনা করে ।
আছে একটি সঞ্চিত পদ্ধতি আপনাকে সাহায্য করতে পারে, কিন্তু permuting একটি সঞ্চিত পদ্ধতি ফলাফল , kludgy হয় হিসাবে আপনি চেনেন।
sp_replmonitorhelppublication null