আমি কাজ করলাম। আমি মিন্ট 13 64 বিট মেট মায়া ব্যবহার করছি যা উবুন্টু 12.04 এর খুব কাছে, ইন্টেল আইভি ব্রিজ hd4000 ইন্টেল জিপিইউ এবং জিফোর্স জিটি 630 মি জিপিইউ ব্যবহার করে এবং i7-3615QM সিপিইউ ব্যবহার করে উবুন্টু 12.04 এর খুব কাছে।
এই সাইটটি অনেক সাহায্য করেছে: http://www.noobslab.com/2012/06/nvidia-drivers-collection-for.html
# Step পদক্ষেপ ব্যতীত সমস্ত পদক্ষেপটি করুন এবং তারপরে আপনাকে টার্মিনালে নিম্নলিখিতটি করতে হবে:
sudo gedit /etc/modprobe.d/blacklist.conf
এখন ফাইলের শেষে নিম্নলিখিত লাইনগুলি যুক্ত করুন এবং সংরক্ষণ করুন:
blacklist amd76x_edac
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
টার্মিনালে আপনাকে নিম্নলিখিতগুলি করতে হবে:
sudo gedit /etc/bumblebee/bumblebee.conf
ফাইলগুলিতে এগুলি পরিবর্তন করুন এবং সংরক্ষণ করুন:
Driver="empty or whatever" to Driver=nvidia
kernelDriver=nvidia-current to KernelDriver=nvidia
sudo update-initramfs -u
আপ বুট বগী ধরনের হতে ছিল পারে Ctrl+ + Alt+ + F6এবং তারপর Ctrl+ + Alt+ + F8পুদিনা 13 জন্য আতঙ্কের কালো পর্দা নামা।
উবুন্টু বিভিন্ন Ctrl+ Alt+ F1এবং তারপরে Ctrl+ Alt+ ব্যবহার করে F7।
sudo reboot
তারপরে আপনার আপডেট ম্যানেজারটি চালান। ওএস নতুন স্টাফ না দেওয়া পর্যন্ত আমার বোম্বলি কাজ করে না।
optirun glxgears
একটি টার্মিনাল চেষ্টা করুন ।
এই সাইটগুলি যা আমার স্যামসাংয়ের জন্য আমাকে অনেক সহায়তা করে:
http://forums.linuxmint.com/viewtopic.php?f=59&t=106262 এবং http://openideals.org/2012/04/15/tuning-ubuntu-on-samsung-series-7-laptop/
আমি দৌড়েছি:
optirun firefox and played www.quakelive.com
optirun glxgears, and optirun glxspheres.
প্লুমা পুদিনা 13 মায়া একটি পাঠ্য সম্পাদক।
এই ফাইলটি দেখতে কেমন:
sudo pluma /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
Here is what this file look like,
sudo pluma /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau