আমার একটি ফুজিৎসু স্ক্যানস্নাপ এস 1300i আছে। আমি উত্স থেকে সান কম্পাইল। আমি যখন রান করি তখন sane-find-scannerনিম্নলিখিত আউটপুটটি দেওয়া হয়:
sane-find-scanner will now attempt to detect your scanner.
If the result is different from what you expected, first make sure your scanner
is powered up and properly connected to your computer.
No SCSI scanners found. If you expected something different, make sure
that you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04c5, product=0x128d) at libusb:002:004
Your USB scanner was (probably) detected. It may or may not be supported by SANE.
Try scanimage -L and read the backend's
manpage.
Not checking for parallel port scanners.
Most Scanners connected to the parallel port or other proprietary ports can't be detected by this program.
You may want to run this program as root to find all devices.
Once you found the scanner devices, be sure to adjust access permissions as necessary.
যাইহোক, যখন আমি রান করি scanimage -Lবা sudo scanimage -Lনিম্নলিখিত আউটপুট দেওয়া হয়:
No scanners were identified. If you were expecting something different.
Check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate).
Please read the documentation which came with this software (README, FAQ, manpages).
এছাড়াও, আমি /etc/sane.d/fujitsu.confস্ক্যানস্প্যাপ এস 1300i এর জন্য একটি এন্ট্রি যুক্ত করেছি।