সম্প্রতি আমি সর্বনিম্ন আমার ওএস ইনস্টল করেছি, তবে আমার মনিটরের রেজোলিউশন সেট করার সময় একটি অপ্রত্যাশিত ত্রুটি পেয়েছি। এটি দেখতে অনেক পুরানো সমস্যার মতো মনে হচ্ছে তবে এবার আরও কিছু আছে (আমার মনে হয়)।
- ডেস্কটপ পরিবেশ ইনস্টল করার:
apt-get update
,apt-get install xorg-core xserver-xorg-core gnome-core gdm3
গ্রাফিক grivers ইনস্টল করতে
apt-get install build-essential nvidia-kernel-common linux-headers-$(uname -r)
,./NVIDIA-Linux-x86_64-304.64.run
উপরোক্ত ধাপগুলি বলে মনে হয় সব কিছু সঠিকভাবে পথ আছে।সেট রেজল্যুশন করুন:
cvt 1440 900
,xrandr --newmode xxx
,xrandr --addmode VGA-0 xxx
তখন আমি সেই ত্রুটি পেয়েছি:
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 153 (RANDR).
Minor opcode of failed request: 18 (RRAddOutputMode).
Serial number of failed request: 29.
Current serial number in output stream: 30
আপনার কী তথ্য দরকার তা আমি জানি না এবং কেবল কয়েকটি তালিকাবদ্ধ করি
গ্রাফিক কার্ডের মডেল: এনভিডিয়া জিটি 630।
গ্রাফিক কার্ডের মেমরির আকার: 512 এমডিডিআর 5।
মনিটর: ফিলিপস 190cw (1440x900, উইন্ডোতে ভাল কাজ করে)। এটি উইন্ডোতে আমার সেটিংস (আমি মনিটর ড্রাইভারটি ইনস্টল করি নি এবং উইন্ডোজ কেবল এটির স্বীকৃতি দেয় 190g6
)
xrandr
আউট পুট
Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
640x480 75.0 72.8 59.9
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
1440x900_60.00 (0x29f) 106.5MHz
h: width 1440 start 1528 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
lshw -c video
আউট পুট
*-display
description: VGA compatible controller
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:05:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:16 memory:f6000000-f6ffffff memory:e0000000-efffffff(prefetchable) memory:f0000000-f1ffffff(prefetchable) ioport:d000(size=128) memory:f7000000-f707ffff(prefetchable)
xorg.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
আমি পেতে edid করার trid: apt-get install read-edid
,sudo get-edid | parse-edid
তবে এই ত্রুটিটি পেয়েছে:
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11100 "NVIDIA"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
আমি nvidia-settings
রিবুট করার পরে রেজুলিউশনটি 1440x900 এ জোর করে বলার চেষ্টা করেছি , রেজোলিউশনটি 1440X1024 এ পরিবর্তন করা হয়েছে (এনভিডিয়া-সেটিংসে xorg.conf এ একটি লাইন যুক্ত করা হয়েছে Option "metamodes" "1440x1024 +0+0"
)। স্ক্রিনটি এর মতো দিগন্ত-স্ক্রোলযোগ্য হয়ে উঠবে:
আমিও উৎপাটনের চেষ্টা edid.bin
(NVIDIA-সেটিংস ব্যবহার দ্বারা) এবং যোগ Option "CustomEDID" "DFP-1:/etc/X11/edid.bin"
এ Section "Device"
xorg.conf করতে। দুর্দান্ত পোস্টের জন্য ধন্যবাদFixing Ugly DVI/HDMI Displays due to EDID bugs on nVidia drivers
, তবে দুর্ভাগ্যক্রমে এটি কার্যকর হয় না।
হালনাগাদ: var/log/Xorg.0.log
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux xx 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=df3ea9ad-faaf-4918-a213-5a673080e935 ro quiet
Build Date: 29 October 2011 06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 8 23:09:08 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:5:0:0) 10de:0f00:0000:0000 nVidia Corporation rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "CustomEDID" "DFP-0:/home/teifi/edid.bin"
(**) Jan 08 23:09:09 NVIDIA(0): Enabling 2D acceleration
(II) Jan 08 23:09:10 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:10 NVIDIA(GPU-0): Vision stereo.
(II) Jan 08 23:09:10 NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:5:0:0 (GPU-0)
(--) Jan 08 23:09:10 NVIDIA(0): Memory: 1048576 kBytes
(--) Jan 08 23:09:10 NVIDIA(0): VideoBIOS: 70.08.aa.00.00
(II) Jan 08 23:09:10 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jan 08 23:09:10 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 08 23:09:10 NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:5:0:0
(--) Jan 08 23:09:10 NVIDIA(0): CRT-0
(--) Jan 08 23:09:10 NVIDIA(0): Philips 190G6 (CRT-1) (connected)
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1
(--) Jan 08 23:09:10 NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): Philips 190G6 (CRT-1): 480.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: Internal Single Link TMDS
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: Internal Single Link TMDS
(**) Jan 08 23:09:10 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:10 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:10 NVIDIA(0): been enabled on all display devices.)
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1440x900"; removing.
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1280x800"; removing.
(II) Jan 08 23:09:10 NVIDIA(0): Validated MetaModes:
(II) Jan 08 23:09:10 NVIDIA(0): "CRT-1:1024x768"
(II) Jan 08 23:09:10 NVIDIA(0): "CRT-1:800x600"
(II) Jan 08 23:09:10 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) Jan 08 23:09:10 NVIDIA(0): DPI set to (68, 65); computed from "UseEdidDpi" X config
(--) Jan 08 23:09:10 NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 08 23:09:10 NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
(II) Jan 08 23:09:10 NVIDIA: access.
(II) Jan 08 23:09:10 NVIDIA(0): Setting mode "CRT-1:1024x768"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "TwinView" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
(**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event2"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:09:59 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:59 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:09:59 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:59 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:59 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0): been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1280x1024 +0+0"
(II) Jan 08 23:10:01 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:01 NVIDIA(GPU-0): Vision stereo.
(**) Jan 08 23:10:01 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:01 NVIDIA(0): device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:01 NVIDIA(0): been enabled on all display devices.)
কোন সাহায্য ব্যাপকভাবে প্রশংসা করা হয়। ধন্যবাদ
@John Siu
বিলম্বিত প্রতুত্তরের জন্য দুঃখিত. আমি প্রশ্নটি আপডেট করছি (1) এটি জিটি 630 512 এম ডিডিআর 5 মেমরি সহ। (2) উইন্ডোতে 32 বিট রঙ ব্যবহার করে।
/var/log/Xorg.0.log
, সম্ভবত পেস্টবিন ডট কম ব্যবহার করুন কারণ এটি দীর্ঘ।