আমি সবেমাত্র 15.10 থেকে উবুন্টু 16.04 এ আপগ্রেড করেছি এবং আমার ভার্চুয়ালবক্স আর আর শুরু করতে চায় না। আমি আমার সিস্টেম থেকে পরিষ্কার করার চেষ্টা করেছি virtualbox, virtualbox-dkmsএবং এটি কার্যকর বলে মনে হচ্ছে (আমি কোনও বিটিডব্লুতে কোনও স্যাসাডমিন নই, তাই এটি বোকা সরল রাখি)। একবার আমি অনলাইন ডিইবি ব্যবহার করে বা পুনরায় ইনস্টল করে ব্যবহার apt-getকরে শেষ পর্যন্ত এটি পেয়ে যাব:
virtualbox.service - LSB: VirtualBox Linux kernel module
Loaded: loaded (/etc/init.d/virtualbox; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2016-04-24 20:22:47 EDT; 10min ago
Docs: man:systemd-sysv-generator(8)
Apr 24 20:22:47 laptop-math systemd[1]: Starting LSB: VirtualBox Linux kernel module...
Apr 24 20:22:47 laptop-math virtualbox[6248]: * Starting VirtualBox kernel modules
Apr 24 20:22:47 laptop-math virtualbox[6248]: * modprobe vboxdrv failed. Please use 'dmesg' to find out why
Apr 24 20:22:47 laptop-math virtualbox[6248]: ...fail!
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Control process exited, code=exited status=1
Apr 24 20:22:47 laptop-math systemd[1]: Failed to start LSB: VirtualBox Linux kernel module.
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Unit entered failed state.
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Failed with result 'exit-code'.
আমি দেখার চেষ্টা করেছি dmesgকিন্তু তথ্যের এই স্তূপটি কীভাবে তৈরি করা যায় সে সম্পর্কে আমার কোনও ধারণা নেই এবং আমি সন্দেহ করি যে এখানে এগুলি আটকে দেওয়া আগ্রহী। আমার জানা কোথায় উচিত তা যদি আপনি জানেন তবে এর একটি অংশ অন্তর্ভুক্ত করা আমার আনন্দ হবে!
সম্পাদনা # 1
ভিবক্স শুরু করা এবং আমার যোদ্ধা বাক্সগুলির একটির চেষ্টা করার ফলে আমি দেখিয়েছি যে আমার modprobeমূল হিসাবে চালানো উচিত । চলার সময় আমি এই বার্তাটি পেয়েছি sudo modprobe vboxdrv:
modprobe: ERROR: could not insert 'vboxdrv': Required key not available
সম্পাদনা # 2:
একজন মন্তব্যকারীর পরামর্শ অনুসরণ করে, আমি এখানে যা বিশ্বাস করি তা হল dmesgModprobe vboxdrv চালানোর 10 মিনিটের সর্বাধিক:
[ 1900.105875] wlp3s0: deauthenticating from 74:44:01:31:82:6d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1900.110727] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110806] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110887] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110914] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.111289] pci_bus 0000:02: Allocating resources
[ 1900.111309] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1900.111314] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1900.111335] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 1900.111347] pci_bus 0000:03: Allocating resources
[ 1900.111368] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1900.111372] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1900.111384] pci_bus 0000:04: Allocating resources
[ 1900.111438] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.111445] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111467] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111471] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111475] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111479] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111483] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111487] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111491] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111494] pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111498] pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111513] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
[ 1900.111532] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
[ 1900.111549] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
[ 1900.111556] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1900.111560] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 1900.112366] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.112622] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.154945] cfg80211: World regulatory domain updated:
[ 1900.154948] cfg80211: DFS Master region: unset
[ 1900.154949] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1900.154950] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154952] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154953] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154954] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1900.154956] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1900.154957] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1900.154958] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154959] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1900.774802] PM: Syncing filesystems ... done.
[ 1900.790627] PM: Preparing system for sleep (mem)
[ 1900.790777] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1900.792506] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1900.793654] PM: Suspending system (mem)
[ 1900.793670] Suspending console(s) (use no_console_suspend to debug)
[ 1900.794278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1900.794322] sd 0:0:0:0: [sda] Stopping disk
[ 1901.246874] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1901.382392] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1901.382637] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1901.382638] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1901.382678] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1901.383024] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1902.022836] PM: suspend of devices complete after 1229.149 msecs
[ 1902.038534] PM: late suspend of devices complete after 15.689 msecs
[ 1902.040285] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1902.040468] r8169 0000:04:00.2: System wakeup enabled by ACPI
[ 1902.040749] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1902.040759] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1902.054620] PM: noirq suspend of devices complete after 16.083 msecs
[ 1902.054823] ACPI: Preparing to enter system sleep state S3
[ 1902.242542] ACPI : EC: EC stopped
[ 1902.242542] PM: Saving platform NVS memory
[ 1902.242569] Disabling non-boot CPUs ...
[ 1902.243866] smpboot: CPU 1 is now offline
[ 1902.256010] smpboot: CPU 2 is now offline
[ 1902.267963] smpboot: CPU 3 is now offline
[ 1902.279906] smpboot: CPU 4 is now offline
[ 1902.290827] Broke affinity for irq 28
[ 1902.291837] smpboot: CPU 5 is now offline
[ 1902.306775] Broke affinity for irq 16
[ 1902.306779] Broke affinity for irq 17
[ 1902.306786] Broke affinity for irq 28
[ 1902.306787] Broke affinity for irq 30
[ 1902.307799] smpboot: CPU 6 is now offline
[ 1902.318717] Broke affinity for irq 1
[ 1902.318724] Broke affinity for irq 9
[ 1902.318728] Broke affinity for irq 12
[ 1902.318731] Broke affinity for irq 16
[ 1902.318735] Broke affinity for irq 17
[ 1902.318739] Broke affinity for irq 23
[ 1902.318742] Broke affinity for irq 28
[ 1902.318742] Broke affinity for irq 30
[ 1902.319757] smpboot: CPU 7 is now offline
[ 1902.335740] ACPI: Low-level resume complete
[ 1902.335787] ACPI : EC: EC started
[ 1902.335788] PM: Restoring platform NVS memory
[ 1902.336849] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.336897] Enabling non-boot CPUs ...
[ 1902.356018] x86: Booting SMP configuration:
[ 1902.356019] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1902.356852] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.359499] cache: parent cpu1 should not be sleeping
[ 1902.359644] CPU1 is up
[ 1902.376075] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1902.376809] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.379497] cache: parent cpu2 should not be sleeping
[ 1902.379641] CPU2 is up
[ 1902.392116] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1902.392821] microcode: CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.395487] cache: parent cpu3 should not be sleeping
[ 1902.395620] CPU3 is up
[ 1902.416194] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 1902.419155] cache: parent cpu4 should not be sleeping
[ 1902.419298] CPU4 is up
[ 1902.436208] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 1902.439158] cache: parent cpu5 should not be sleeping
[ 1902.439294] CPU5 is up
[ 1902.460290] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 1902.463338] cache: parent cpu6 should not be sleeping
[ 1902.463483] CPU6 is up
[ 1902.480157] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 1902.483383] cache: parent cpu7 should not be sleeping
[ 1902.483573] CPU7 is up
[ 1902.490537] ACPI: Waking up from system sleep state S3
[ 1903.368148] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1903.368486] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1903.368656] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1903.368822] PM: noirq resume of devices complete after 15.637 msecs
[ 1903.369240] PM: early resume of devices complete after 0.396 msecs
[ 1903.369406] usb usb1: root hub lost power or was reset
[ 1903.369430] usb usb3: root hub lost power or was reset
[ 1903.369432] usb usb4: root hub lost power or was reset
[ 1903.369472] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1903.369486] usb usb2: root hub lost power or was reset
[ 1903.369560] ath: phy0: ASPM enabled: 0x42
[ 1903.370035] r8169 0000:04:00.2: System wakeup disabled by ACPI
[ 1903.370373] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 1903.373308] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1903.373396] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1903.373519] sd 0:0:0:0: [sda] Starting disk
[ 1903.373707] mei_me 0000:00:16.0: FW not ready: resetting.
[ 1903.373750] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106
[ 1903.454924] r8169 0000:04:00.2 enp4s0f2: link down
[ 1903.500893] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1903.691753] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1903.694068] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.694071] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.696093] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.696096] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.696848] ata3.00: configured for UDMA/100
[ 1903.699753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1903.703759] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 1903.703762] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1903.710422] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1903.711558] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.711561] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.721340] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1903.722536] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.722539] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.727946] ata1.00: configured for UDMA/133
[ 1904.115729] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 1904.244276] PM: resume of devices complete after 875.105 msecs
[ 1904.244617] PM: Finishing wakeup.
[ 1904.244619] Restarting tasks ... done.
[ 1904.315684] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 1904.398181] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.409914] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[ 1904.409917] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1904.409919] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 1904.409921] usb 1-1.1: Manufacturer: Atheros Communications
[ 1904.409922] usb 1-1.1: SerialNumber: Alaska Day 2006
[ 1904.416252] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.417249] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 1904.502630] r8169 0000:04:00.2 enp4s0f2: link down
[ 1904.502695] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 1904.549004] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.657804] usb 1-1.1: USB disconnect, device number 5
[ 1904.855645] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 1905.540874] wlp3s0: authenticate with 74:44:01:31:82:6d
[ 1905.555155] wlp3s0: send auth to 74:44:01:31:82:6d (try 1/3)
[ 1905.557111] wlp3s0: authenticated
[ 1905.559536] wlp3s0: associate with 74:44:01:31:82:6d (try 1/3)
[ 1905.563391] wlp3s0: RX AssocResp from 74:44:01:31:82:6d (capab=0x411 status=0 aid=6)
[ 1905.563480] wlp3s0: associated
[ 1905.563512] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1909.587325] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1909.587503] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1909.587644] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1909.587650] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1909.587694] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1909.588020] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1909.949170] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[ 1909.949173] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1909.949175] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 1909.949176] usb 1-1.1: Manufacturer: Atheros Communications
[ 1909.949177] usb 1-1.1: SerialNumber: Alaska Day 2006
আপনি কোনও এক্সটেনশন প্যাকটি ব্যবহার করছেন না যা আপগ্রেড করা দরকার? আমি ঠিক একই জিনিসটি করেছি (সংস্করণ অনুসারে) এবং এটি শুরু করতে ব্যর্থ হয়েছিল যতক্ষণ না মনে পড়ে যে আমি এক্সটেনশন প্যাকটি আপডেট করি নি, তার পরে এটি মসৃণ নৌযান ছিল was
—
ডেনিস
আমি ভ্যাগ্র্যান্ট-আউস-প্রোভাইডার ব্যবহার করছি তবে প্রযুক্তিগতভাবে না, কিছুই ব্যবহার করা হয়নি। আমার এটি ইনস্টল করা উচিত sudo apt-get ইনস্টল ভার্চুয়ালবক্স ব্যবহার করে এবং ঠিক আছে
—
ম্যাথিউ ডুমুলিন
আপনি কি দয়া করে আউটপুট অন্তর্ভুক্ত করতে পারেন
—
ডেভিড ফোরস্টার
dmesg? চলার পরে 10 সেকেন্ড বা তার মধ্যে ঘটে যাওয়া আইটেমগুলি sudo modprobe vbxdrv( dmesgআগে এবং পরে চালানো এবং কেবল নতুন এন্ট্রিগুলি অন্তর্ভুক্ত করা হয়)। আউটপুট uname -aএবং modinfo vboxdrvখুব সাহায্য করবে।
আপনি কোন "অনলাইন ডিইবি" ব্যবহার করছেন এবং আপনি এটি ইনস্টল করলে কী ঘটে?
—
fkraiem
@fkraiem অনলাইন ডেবটি ভার্চুয়ালবক্সের ডাউনলোড পৃষ্ঠায় উবুন্টু 16 এর AMD64 যা সম্ভবত একটিটি ডিফল্টরূপে ইনস্টল হয়ে গেছে!
—
ম্যাথিউ ডুমুলিন