আপনি যদি উত্স থেকে গিট তৈরি করতে ইচ্ছুক হন তবে নিম্নলিখিতগুলি সহায়তা করতে পারে। তারা নোলায়দার গিথুব থেকে স্ক্রিপ্ট তৈরি করছে বিল্ড-স্ক্রিপ্ট । আমি সেগুলি সেন্টস 5 এবং একটি এমআইপিএস সি 2020 বোর্ড বোর্ডের মতো পুরানো ওএসের জন্য ব্যবহার করি। ডিস্ট্রসগুলি আর রেপোগুলি বজায় রাখে না, সুতরাং এটি সফ্টওয়্যারটি আপডেট করার একমাত্র নির্ভরযোগ্য উপায়। স্ক্রিপ্টগুলি সোলারিসের মতো নতুন ওএসের জন্যও কার্যকর, যেহেতু ওরাকল আপনাকে আপডেটগুলি পেতে কোনও পরিষেবার চুক্তি কিনতে চায়।
এখানে গিট স্ক্রিপ্ট। উত্তরের কিছু পদার্থ আছে তা নিশ্চিত করার জন্য এটি এখানে যুক্ত হয়েছে। তবে কিছুটা প্যাকেজের সর্বশেষতম প্রকাশ পেতে উপলক্ষে আমি এগুলিকে সংশোধন করেছি তাই আপনার গিটহাবে ফিরে যেতে হবে।
#!/usr/bin/env bash
# See fixup for INSTALL_LIBDIR below
INSTALL_PREFIX=/usr/local
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
# OpenSSH can only use OpenSSL 1.0.2 at the moment
OPENSSL_TAR=openssl-1.0.2l.tar.gz
OPENSSL_DIR=openssl-1.0.2l
#OPENSSL_TAR=openssl-1.1.0e.tar.gz
#OPENSSL_DIR=openssl-1.1.0e
ZLIB_TAR=zlib-1.2.11.tar.gz
ZLIB_DIR=zlib-1.2.11
BZ2_TAR=bzip2-1.0.6.tar.gz
BZ2_DIR=bzip2-1.0.6
READLN_TAR=readline-7.0.tar.gz
READLN_DIR=readline-7.0
UNISTR_TAR=libunistring-0.9.7.tar.gz
UNISTR_DIR=libunistring-0.9.7
ICONV_TAR=libiconv-1.15.tar.gz
ICONV_DIR=libiconv-1.15
IDN2_TAR=libidn2-0.16.tar.gz
IDN2_DIR=libidn2-0.16
PCRE_TAR=pcre-8.40.tar.gz
PCRE_DIR=pcre-8.40
PCRE2_TAR=pcre2-10.23.tar.gz
PCRE2_DIR=pcre2-10.23
CURL_TAR=curl-7.54.0.tar.gz
CURL_DIR=curl-7.54.0
GIT_TAR=v2.13.0.tar.gz
GIT_DIR=git-2.13.0
# Unset to avoid using an existing trust store when configuring cURL.
# No trust store will be supplied for some OSes, like Solaris.
# Also see '/usr/bin/curl-config --ca' and '/usr/bin/curl-config --configure'
USE_TRUST_STORE=1
###############################################################################
# Autotools on Solaris has an implied requirement for GNU gear. Things fall apart without it.
# Also see https://blogs.oracle.com/partnertech/entry/preparing_for_the_upcoming_removal.
if [[ -d "/usr/gnu/bin" ]]; then
if [[ ! ("$PATH" == *"/usr/gnu/bin"*) ]]; then
echo
echo "Adding /usr/gnu/bin to PATH for Solaris"
PATH="/usr/gnu/bin:$PATH"
fi
elif [[ -d "/usr/swf/bin" ]]; then
if [[ ! ("$PATH" == *"/usr/sfw/bin"*) ]]; then
echo
echo "Adding /usr/sfw/bin to PATH for Solaris"
PATH="/usr/sfw/bin:$PATH"
fi
elif [[ -d "/usr/ucb/bin" ]]; then
if [[ ! ("$PATH" == *"/usr/ucb/bin"*) ]]; then
echo
echo "Adding /usr/ucb/bin to PATH for Solaris"
PATH="/usr/ucb/bin:$PATH"
fi
fi
###############################################################################
if [[ -z `which autoreconf` ]]; then
echo "Some packages require autoreconf. Please install autoconf or automake."
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
if [[ -z `which msgfmt` ]]; then
echo "Git requires msgfmt. Please install gettext."
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
###############################################################################
echo
echo "If you enter a sudo password, then it will be used for installation."
echo "If you don't enter a password, then ensure INSTALL_PREFIX is writable."
echo "To avoid sudo and the password, just press ENTER and they won't be used."
read -s -p "Please enter password for sudo: " SUDO_PASSWWORD
echo
###############################################################################
THIS_SYSTEM=$(uname -s 2>&1)
IS_DARWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c darwin)
IS_LINUX=$(echo -n "$THIS_SYSTEM" | grep -i -c linux)
IS_CYGWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c cygwin)
IS_MINGW=$(echo -n "$THIS_SYSTEM" | grep -i -c mingw)
IS_OPENBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c openbsd)
IS_DRAGONFLY=$(echo -n "$THIS_SYSTEM" | grep -i -c dragonfly)
IS_FREEBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c freebsd)
IS_NETBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c netbsd)
IS_SOLARIS=$(echo -n "$THIS_SYSTEM" | grep -i -c sunos)
if [[ ("$IS_FREEBSD" -eq "1" || "$IS_OPENBSD" -eq "1" || "$IS_NETBSD" -eq "1" || "$IS_DRAGONFLY" -eq "1" || "$IS_SOLARIS" -eq "1") ]]; then
if [[ !(-z `which gmake 2>/dev/null | grep -v 'no gmake'`) ]]; then
MAKE=gmake
else
MAKE=make
fi
else
MAKE=make
fi
# Try to determine 32 vs 64-bit, /usr/local/lib, /usr/local/lib32 and /usr/local/lib64
# The Autoconf programs misdetect Solaris as x86 even though its x64. OpenBSD has
# getconf, but it does not have LONG_BIT.
IS_64BIT=$(getconf LONG_BIT 2>&1 | grep -i -c 64)
if [[ "$IS_64BIT" -eq "0" ]]; then
IS_64BIT=$(file /bin/ls 2>&1 | grep -i -c '64-bit')
fi
if [[ "$IS_SOLARIS" -eq "1" ]]; then
SH_KBITS=64
SH_MARCH=-m64
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
INSTALL_LIBDIR_DIR="lib64"
elif [[ "$IS_64BIT" -eq "1" ]]; then
if [[ (-d /usr/lib) && (-d /usr/lib32) ]]; then
SH_KBITS=64
SH_MARCH=-m64
INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
INSTALL_LIBDIR_DIR="lib"
elif [[ (-d /usr/lib) && (-d /usr/lib64) ]]; then
SH_KBITS=64
SH_MARCH=-m64
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
INSTALL_LIBDIR_DIR="lib64"
else
SH_KBITS=64
SH_MARCH=-m64
INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
INSTALL_LIBDIR_DIR="lib"
fi
else
SH_KBITS=32
SH_MARCH=-m32
INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
INSTALL_LIBDIR_DIR="lib"
fi
if [[ -z "$CC" ]]; then CC=`which cc`; fi
MARCH_ERROR=`$CC $SH_MARCH -x c -c -o /dev/null - </dev/null 2>&1 | grep -i -c error`
if [[ "$MARCH_ERROR" -ne "0" ]]; then
SH_MARCH=
fi
echo
echo "********** libdir **********"
echo
echo "Using libdir $INSTALL_LIBDIR"
###############################################################################
echo
echo "********** zLib **********"
echo
wget "http://www.zlib.net/$ZLIB_TAR" -O "$ZLIB_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download zLib"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$ZLIB_DIR" &>/dev/null
tar -xzf "$ZLIB_TAR"
cd "$ZLIB_DIR"
SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure zLib"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build zLib"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** Bzip **********"
echo
wget "http://www.bzip.org/1.0.6/$BZ2_TAR" -O "$BZ2_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download Bzip"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$BZ2_DIR" &>/dev/null
tar -xzf "$BZ2_TAR"
cd "$BZ2_DIR"
# Fix Bzip install paths
cp Makefile Makefile.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig
# Fix Bzip cpu architecture
cp Makefile Makefile.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
cp Makefile Makefile.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig
# Add RPATH
cp Makefile Makefile.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build Bzip"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install PREFIX="$INSTALL_PREFIX" LIBDIR="$INSTALL_LIBDIR")
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** Unistring **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/libunistring/$UNISTR_TAR" --no-check-certificate -O "$UNISTR_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$UNISTR_DIR" &>/dev/null
tar -xzf "$UNISTR_TAR"
cd "$UNISTR_DIR"
SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** Readline **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/readline/$READLN_TAR" --no-check-certificate -O "$READLN_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download Readline"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$READLN_DIR" &>/dev/null
tar -xzf "$READLN_TAR"
cd "$READLN_DIR"
SH_LDLIBS=("-ldl" "-lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure Readline"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build Readline"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** iConvert **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/pub/gnu/libiconv/$ICONV_TAR" --no-check-certificate -O "$ICONV_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download iConvert"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$ICONV_DIR" &>/dev/null
tar -xzf "$ICONV_TAR"
cd "$ICONV_DIR"
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure iConvert"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build iConvert"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** IDN2 **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://alpha.gnu.org/gnu/libidn/$IDN2_TAR" --no-check-certificate -O "$IDN2_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$IDN2_DIR" &>/dev/null
tar -xzf "$IDN2_TAR"
cd "$IDN2_DIR"
if [[ "$IS_SOLARIS" -eq "1" ]]; then
cp src/idn2.c src/idn2.c.orig
sed '/^#include "error.h"/d' src/idn2.c.orig > src/idn2.c
cp src/idn2.c src/idn2.c.orig
sed '43istatic void error (int status, int errnum, const char *format, ...);' src/idn2.c.orig > src/idn2.c
rm src/idn2.c.orig
echo "" >> src/idn2.c
echo "static void" >> src/idn2.c
echo "error (int status, int errnum, const char *format, ...)" >> src/idn2.c
echo "{" >> src/idn2.c
echo " va_list args;" >> src/idn2.c
echo " va_start(args, format);" >> src/idn2.c
echo " vfprintf(stderr, format, args);" >> src/idn2.c
echo " va_end(args);" >> src/idn2.c
echo " exit(status);" >> src/idn2.c
echo "}" >> src/idn2.c
echo "" >> src/idn2.c
fi
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build IDN"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** OpenSSL **********"
echo
# wget on Ubuntu 16 cannot validate against Let's Encrypt certificate
wget "https://www.openssl.org/source/$OPENSSL_TAR" --no-check-certificate -O "$OPENSSL_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download OpenSSL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$OPENSSL_DIR" &>/dev/null
tar -xzf "$OPENSSL_TAR"
cd "$OPENSSL_DIR"
# OpenSSL and enable-ec_nistp_64_gcc_128 option
IS_X86_64=$(uname -m 2>&1 | egrep -i -c "(amd64|x86_64)")
if [[ "$SH_KBITS" -eq "32" ]]; then IS_X86_64=0; fi
CONFIG=./config
CONFIG_FLAGS=("no-ssl2" "no-ssl3" "no-comp" "shared" "-DNDEBUG" "-Wl,-rpath,$INSTALL_LIBDIR"
"--prefix=$INSTALL_PREFIX" "--openssldir=$INSTALL_PREFIX" "--libdir=$INSTALL_LIBDIR_DIR")
if [[ "$IS_X86_64" -eq "1" ]]; then
CONFIG_FLAGS+=("enable-ec_nistp_64_gcc_128")
fi
KERNEL_BITS="$SH_KBITS" "$CONFIG" "${CONFIG_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure OpenSSL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4 depend)
"$MAKE" "${MAKE_FLAGS[@]}"
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build OpenSSL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install_sw)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** PCRE **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE_TAR" --no-check-certificate -O "$PCRE_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download PCRE"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$PCRE_DIR" &>/dev/null
tar -xzf "$PCRE_TAR"
cd "$PCRE_DIR"
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --enable-pcregrep-libz --enable-pcregrep-libbz2 \
--prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure PCRE"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build PCRE"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** PCRE2 **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE2_TAR" --no-check-certificate -O "$PCRE2_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download PCRE2"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$PCRE2_DIR" &>/dev/null
tar -xzf "$PCRE2_TAR"
cd "$PCRE2_DIR"
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --enable-pcre2-8 --enable-pcre2-16 --enable-pcre2-32 \
--prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure PCRE2"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build PCRE2"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** cURL **********"
echo
# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://curl.haxx.se/download/$CURL_TAR" --no-check-certificate -O "$CURL_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download cURL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$CURL_DIR" &>/dev/null
tar -xzf "$CURL_TAR"
cd "$CURL_DIR"
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lidn2" "-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")
if [[ ("$IS_SOLARIS" -ne ")" && "$USE_TRUST_STORE" -ne "0") ]]; then
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --without-ca-bundle --with-ca-path=/etc/openssl/certs --enable-ipv6 \
--with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
--with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
else
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-shared --enable-ipv6 --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
--with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
fi
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure cURL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -ne "0" ]]; then
echo "Failed to build cURL"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** Git **********"
echo
# wget on Ubuntu 16 cannot validate against DigiCert certificate
wget "https://github.com/git/git/archive/$GIT_TAR" --no-check-certificate -O "$GIT_TAR"
if [[ "$?" -ne "0" ]]; then
echo "Failed to download Git"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
rm -rf "$GIT_DIR" &>/dev/null
tar -xzf "$GIT_TAR"
cd "$GIT_DIR"
"$MAKE" configure
if [[ "$?" -ne "0" ]]; then
echo "Failed to make configure Git"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
# "Instruct Git to use pthread library?", http://stackoverflow.com/q/43080417/
for file in $(find `pwd` -iname 'Makefile*')
do
cp "$file" "$file.orig"
sed 's|-lrt|-lrt -lpthread|g' "$file.orig" > "$file"
rm "$file.orig"
done
# Various Solaris 11 workarounds
if [[ "$IS_SOLARIS" -eq "1" ]]; then
for file in $(find `pwd` -iname 'Makefile*')
do
cp "$file" "$file.orig"
sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
cp "$file" "$file.orig"
sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
rm "$file.orig"
done
for file in $(find `pwd` -iname 'config*')
do
cp "$file" "$file.orig"
sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
cp "$file" "$file.orig"
sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
rm "$file.orig"
done
fi
if [[ -e /usr/local/bin/perl ]]; then
SH_PERL=/usr/local/bin/perl
elif [[ -e /usr/bin/perl ]]; then
SH_PERL=/usr/bin/perl
else
SH_PERL=perl
fi
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")
CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
./configure --enable-pthreads --with-lib="$INSTALL_LIBDIR" --with-openssl="$INSTALL_PREFIX" \
--with-curl="$INSTALL_PREFIX" --with-libpcre="$INSTALL_PREFIX" --with-zlib="$INSTALL_PREFIX" \
--with-iconv="$INSTALL_PREFIX" --with-perl="$SH_PERL" --prefix="$INSTALL_PREFIX"
if [[ "$?" -ne "0" ]]; then
echo "Failed to configure Git"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
# See INSTALL for the formats and the requirements
MAKE_FLAGS=(-j 4 all)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
MAKE_FLAGS+=("man")
fi
if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
MAKE_FLAGS+=("info" "html")
fi
fi
"$MAKE" "${MAKE_FLAGS[@]}"
if [[ "$?" -eq "1" ]]; then
echo "Failed to build Git"
[[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi
# See INSTALL for the formats and the requirements
MAKE_FLAGS=(install)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
MAKE_FLAGS+=("install-man")
fi
if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
MAKE_FLAGS+=("install-info" "install-html")
fi
fi
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
"$MAKE" "${MAKE_FLAGS[@]}"
fi
cd ..
###############################################################################
echo
echo "********** Cleanup **********"
echo
# Set to false to retain artifacts
if true; then
ARTIFACTS=("$OPENSSL_TAR" "$OPENSSL_DIR" "$UNISTR_TAR" "$UNISTR_DIR" "$READLN_TAR" "$READLN_DIR"
"$PCRE_TAR" "$PCRE_DIR" "$PCRE2_TAR" "$PCRE2_DIR" "$ZLIB_TAR" "$ZLIB_DIR" "$BZ2_TAR" "$BZ2_DIR"
"$IDN2_TAR" "$IDN2_DIR" "$ICONV_TAR" "$ICONV_DIR" "$CURL_TAR" "$CURL_DIR" "$GIT_TAR" "$GIT_DIR")
for artifact in "${ARTIFACTS[@]}"; do
rm -rf "$artifact"
done
# ./build-git.sh 2>&1 | tee build-git.log
if [[ -e build-git.log ]]; then
rm build-git.log
fi
fi
[[ "$0" = "$BASH_SOURCE" ]] && exit 0 || return 0
যদি আপনিsudoপাসওয়ার্ডটিব্যবহার করার সিদ্ধান্ত নেন, তবেপাসওয়ার্ডটি লগ না হওয়াতে অস্থায়ীভাবে বাশ ইতিহাস অক্ষম করার বিষয়টি বিবেচনা করুন। আমি ইতিহাস অক্ষম করি যাতে আমি দুর্ঘটনাক্রমে সংবেদনশীল তথ্য লগ না করি, তাই এটি আমার পক্ষে সমস্যা নয়।